Freescale Eight-Core P4080 Processor-Based Conduction- or Air-Cooled VPX-REDI Module Tweet

Features:
* Freescale P4080 processor with eight PowerPC e500 cores at up to 1.5 GHz
* 3U VPX (VITA 46) module
* Ruggedized Enhanced Design Implementation (REDI)
* Conduction or air cooling
* Two channels of up to DDR3-1333 ECC SDRAM, up to 8 GB (4 GB each)
* Up to 256 MB of NOR flash (with redundancy)
* Up to 16 GB of NAND flash
* Hardware write-protection for NVRAM
* PrPMC/XMC interface
* x4 PCI Express or Serial RapidIO Fat Pipe P1.A fabric interconnect
* x4 PCI Express or Serial RapidIO Fat Pipe P1.B fabric interconnect
* Two SERDES Gigabit Ethernet Thin Pipe P1 fabric interconnects
* Two optional 10/100/1000BASE-T Ethernet ports
* Up to two RS-232/RS-422/RS-485 serial P2 ports
* Front I/O available via plugover module
* Linux BSP
* Wind River VxWorks BSP
* QNX Neutrino BSP
* Green Hills INTEGRITY BSP

Description

The XPedite5470 is a high-performance 3U VPX-REDI single-board computer based on the Freescale P4080 processor. With eight PowerPC e500 cores running at up to 1.5 GHz, the P4080 delivers enhanced performance and efficiency for today's embedded computing applications.

The XPedite5470 supports two separate channels of up to 4 GB each of up to DDR3-1333 ECC SDRAM, as well as up to 16 GB of NAND flash and up to 256 MB of NOR flash (with redundancy). The XPedite5470 provides the option of utilizing a PCI Express or Serial RapidIO Fat Pipe P1 interconnects, as well as two SERDES Gigabit Ethernet Thin Pipe P1 fabric interconnects. The XPedite5470 also supports dual Gigabit Ethernet, GPIO, I²C, PMC I/O, XMC I/O, and up to two RS-232/RS-422/RS-485 serial ports through the P2 connector.

The XPedite5470 provides a ruggedized, high-performance, feature-rich solution to support the next generation of rugged embedded applications. Wind River VxWorks, QNX Neutrino, Linux and Green Hills INTEGRITY Board Support Packages (BSPs) are available.
Technical Specifications
XPedite5470 Block Diagram
Processor

* Freescale P4080 processor
* Eight PowerPC e500 cores at up to 1.5 GHz
* 128 KB L2 cache per core
* 1 MB L3 cache per channel
* IEEE754 Floating Point Unit support

Memory

* Two channels of up to DDR3-1333 ECC SDRAM, up to 8 GB (4 GB each)
* Up to 256 MB of NOR flash (with redundancy)
* Up to 16 GB of NAND flash

VPX (VITA 46) P1 I/O

* x4 PCI Express or Serial RapidIO to P1.A
* x4 PCI Express or Serial RapidIO to P1.B
* Two SERDES Gigabit Ethernet ports (or one 10/100/1000BASE-T port out P1 and one 10/100/1000BASE-T port out P2)
* X12d XMC P16 I/O

VPX (VITA 46) P2 I/O

* One 10/100/1000BASE-T port (when two SERDES Gigabit Ethernet P1 ports are not used)
* Up to two RS-232/RS-422/RS-485 serial ports
* I²C port
* 3.3V GPIO signals
* P64s PMC P14 I/O

PrPMC/XMC Site

* 32-bit, 66-MHz PCI bus (PMC interface)
* x4 PCIe port (XMC interface)
* P64s P14 I/O support
* X12d P16 I/O support

Front Panel I/O

* Front-panel RJ45 Ethernet and mini-DB9 RS-232 serial ports available via optional plugover module

Software Support

* Linux BSP
* Wind River VxWorks BSP
* QNX Neutrino BSP
* Green Hills INTEGRITY BSP

Physical Characteristics

* 3U VPX-REDI conduction- or air-cooled form factor
* Dimensions: 100 mm x 160 mm
* 0.8-in. pitch without solder side cover
* 0.85 and 1.0-in. pitch with solder side cover

Environmental Requirements

* Supported ruggedization levels (see chart below):
Level 1, Level 2, Level 3, Level 4, Level 5
* Humidity: 0% to 95% non-condensing
* Storage temperature: -55 to 105 ºC

Power Requirements

* Maximum power consumption: 40 W (estimate)

Labels: